Compatibility
Works with every PC‑based audiometer
Flex PC fits right into the setup you already have.
Interacoustics, Natus, Otometrics, MedRx and Inventis compatible.
Any PC‑based audiometer.
Flex PC is compatible across PC‑based audiometers, so there’s no new hardware to buy.
Astera² buttons, built in.
Use the Otometrics / Natus buttons on the Astera² Audiometer Control Panel to run Flex.
Same workflow.
Keep testing the way you already do. Flex PC works alongside it.
Try Flex PC.
This is Flex PC running over audiometry software. Hold Left, Center or Right on the bar, or use your hotkeys, and the monitors in the booth reward. Change the stimulus, volume and lights, or tap the gear to set your own hotkeys.
Left, center and right
Click the big buttons or use your hotkeys. Hold to reinforce for as long as you press, or use timed activation.
The whole remote
Choose Video, Toy, Lights Only or Custom, change the volume, mute, start Distract and switch the lights.
Always ready
Hotkeys keep working while your audiometry software is in front. Pause them with one click, and fade the bar with the slider.
Camera View
With the optional Flex Cam, see the booth on your screen and record a session with one click.
Hands on the keyboard, eyes on the patient.
No remote to reach for between presentations, so reinforcement lands the moment the child turns. Setting up takes a few minutes.
1
Plug in the transmitter
The small USB transmitter sends each activation wirelessly to your Flex monitors and toys.
2
Install Flex PC
Download it for Windows 10 or 11. A green light on the bar confirms the transmitter is connected.
3
Choose your keys
Pick a key for left, center and right, and start testing from the software you already use.
The transmitter
Two inches long, powered by the USB port, and paired to your Flex system.
Operating system
Windows 10 or later
Connection
USB-A
Power
5 V from USB
Range
15 m (49 ft)
Signal
Paired 433 MHz radio
Response
0.25 seconds
Warranty
1 year
Works with computer-based audiometers. For the Otometrics Astera 2 by Natus, it allows for VRA activation from the physical VRA buttons on the Audiometer Control Panel.