Flex VRA accessory · $825
Flex Screen Mirror: In-Booth Audiology Display
Screen Mirror lets audiologists view and interact with audiometric data directly inside the booth. Show your audiometer, PC or video otoscope on the Flex VRA monitor, right where the patient is.
Includes 15 ft HDMI cable and wireless keyboard
What you can do with Screen Mirror
Bring the tools you use outside the booth to the screen inside it.
1
Review audiograms in the booth
Review completed audiograms with patients and families without leaving the booth.
2
Show a video otoscope
View a live video otoscope image directly on the Flex VRA monitor.
3
Support counseling
Use on-screen annotation, drawings and visuals to explain results.
4
Control software during testing
Control your audiometric software from inside the booth with the included wireless keyboard and trackpad.
Good to know: Screen Mirror sends the picture only
Touching the Flex VRA monitor doesn’t control your audiometer or computer. To control the source from inside the booth, use the included wireless keyboard and trackpad.
How to set up Screen Mirror
Setup uses the video input and HDMI cable that come in the box. Nothing is installed on your audiometer or computer.
INSIDE THE BOOTH
OPERATOR SIDE
Flex VRA monitor
In the booth
Video input
USB capture card
Jack panel
Booth pass-through
Audiometer or PC
HDMI video out
USB
HDMI · 15 ft
HDMI
1
Plug in the video input
Choose the Flex VRA monitor for Screen Mirror and plug the capture card’s USB cable into an open port on that monitor.
2
Connect the HDMI cable
Plug one end of the 15 ft HDMI cable into the capture card.
3
Run it out of the booth
Pass the HDMI cable through the jack panel’s pass-through hole to the operator side.
4
Plug in the video source
Plug the other end into the HDMI port of your audiometer, such as a GSI AudioStar Pro, or your computer.
Then tap the Flex VRA monitor and select Screen Mirror from the on-screen menu. Use Draw to mark up the picture, Freeze to hold it, and Close to go back to VRA.
Price and what’s included
In the box
✓ Flex video input (HDMI to USB capture card)
✓ 15 ft HDMI cable
✓ Wireless keyboard and trackpad for use in the booth
Requirements
✓ Flex VRA software 2.0 or higher
✓ An audiometer or computer with HDMI video out, or a USB video otoscope
How Screen Mirror works
Connect a device to Screen Mirror and its display appears on the Flex VRA monitor inside the booth.
Screen Mirror with a computerized audiometer
Screen Mirror works on PCs and audiometers with HDMI video out.
Screen Mirror with a video otoscope
Screen Mirror works with most video otoscopes that act as camera devices in Windows. Shown here with a GSI Video Otoscope.
Not sure if your device is compatible? Email sales@flexvra.com and we’ll check for you.
Screen Mirror frequently asked questions
What does Flex Screen Mirror do?
It shows your audiometer, computer or video otoscope on a Flex VRA monitor inside the booth, so you can review audiograms and counsel patients without leaving the room.
How much does Screen Mirror cost?
Screen Mirror is $825. It includes the Flex video input, a 15 ft HDMI cable and a wireless keyboard and trackpad, with a 1-year warranty.
Can I use the Flex VRA touchscreen to control my audiometer?
No. Screen Mirror sends the picture only, so touching the Flex VRA monitor doesn’t control the audiometer or computer. Use the included wireless keyboard and trackpad to control the source from inside the booth.
Which audiometers work with Screen Mirror?
Audiometers and computers with HDMI video out, such as the GSI AudioStar Pro. It needs Flex VRA software 2.0 or higher.
Which video otoscopes work with Screen Mirror?
Most video otoscopes that act as camera devices in Windows, such as the GSI Video Otoscope.
How do I start mirroring?
Tap the Flex VRA monitor and select Screen Mirror from the on-screen menu. Draw lets you mark up the picture, Freeze holds it, Live Feed returns to the moving picture, and Close takes you back to VRA.
How do I know if my device is compatible?
Email sales@flexvra.com with your device model and we’ll let you know.
Add Screen Mirror to your Flex VRA
Screen Mirror is $825 and works with Flex VRA software 2.0 or higher. Get a quote, or email sales@flexvra.com to check your audiometer or otoscope.